^
Remove the water container after the
water intake process.
^
Confirm the message showing that
the process has finished with OK
sensor.
^
Close the door.
You will hear the pump briefly as the
remaining water in the water intake pipe
is drawn into the oven.
The oven heating and the cooling fan
will switch on. The required and actual
temperatures will appear in the display.
You will see the temperature
increasing.
A buzzer will sound when the selected
temperature is first reached. See
"Settings - Buzzer tones".
If you have selected "Time-controlled
steam", the time at which to release
the next burst of steam will appear. If
necessary you can alter this time with
the X sensor.
Changing the type of heating
With some recipes it is advisable to
change the function.
^
Touch X.
^
Scroll through the list until "Type of
heating" is highlighted.
^
Touch the OK sensor.
^
Select the function you want.
^
Touch the OK sensor.
Moisture plus d
62
To Next Page
Loading...
Need help?
General
