Starting pyrolytic cleaning
,
Danger of burning.
The oven door gets much hotter
during the pyrolytic process than
during normal use.
Make sure children cannot touch the
oven whilst pyrolytic cleaning is in
progress.
^
Select "Maintenance".
^
Select "Pyrolytic".
The pyrolytic cleaning level will be
highlighted.
You can select Level 1, 2 or 3 with "+"
or "–".
^ Select the level required.
^ Select "OK".
Follow the instructions in the display.
^ Select "OK".
"Start now"
To start pyrolytic cleaning straight
away:
^
Select "Start now".
Pyrolytic cleaning will now start.
The door locks automatically.
The oven heating and the cooling fan
will then switch on automatically.
The oven lighting will not come on
during pyrolytic cleaning.
The time remaining for pyrolitic
cleaning will appear in the display. You
cannot alter the duration.
If you have set a minute minder at the
same time as running pyrolytic
cleaning, the buzzer will sound and the
N symbol will start flashing at the end
of the minute minder duration. The time
will then continue to increase in the
display.
The buzzer will stop and the visual
indicators will go out as soon as you
touch the N sensor.
"Start later"
To start pyrolytic cleaning later on:
^ Select "Start later".
^ Set the time you want it to start at.
^ Select "OK".
The door will lock automatically.
"Start at" and the start time set will
appear in the display. You can alter the
start or end time up until the process is
due to start via "Change".
As soon as the start time is reached,
the oven heating and the cooling fan
will switch on automatically. The
duration remaining will show in the
display.
Cleaning and care
109
To Next Page
Loading...
Need help?
General
