Miele HG07-W User Manual

Installation
*INSTALLATION*
119
Electrical connection
 Installation, repairs and other
work by unqualified persons could
be dangerous.
Check that the voltage, frequency
and fuse rating shown on the data
plate match the household power
supply.
The power outlet must be accessible
after installation. Do not use an ex-
tension cord to connect the dish-
washer to the electrical supply. Dan-
ger of overheating! See data plate on
the right side of the door.
A damaged power cord must only be
replaced with a genuine Miele cord
by a Miele service technician.
Grounding instructions
THIS APPLIANCE MUST BE
GROUNDED.
In the event of a malfunction or break-
down, grounding will reduce the risk of
electric shock by providing a path of
least resistance for the electrical cur-
rent. This appliance is equipped with a
cord having an equipment grounding
conductor and a grounding plug. The
plug must be plugged into an appropri-
ate outlet that is installed and grounded
in accordance with all local codes and
ordinances.
 Improper connection of the
equipment grounding conductor can
result in electric shock.
Do not modify the plug provided with
the appliance; if it will not fit the out-
let, have a proper outlet installed by
a qualified electrician.
If there is any question concerning
the proper electrical connection or
grounding of this appliance to the
power supply, please consult a li-
censed electrician or call Miele’s
Customer Service Department:
USA: 1-888-99-MIELE(64353)
CDN: 1-800-565-6435
Specifications
The dishwasher comes equipped with a
4ft (1.2m) power cord (measured from
the rear of the dishwasher) with a
molded plug for connection to 120V,
60Hz, 15A grounded receptacle.

Miele HG07-W Specifications

General

Brand	Miele
Model	HG07-W
Category	Dishwasher
Language	English