Frequently Asked Questions
98
With the help of the following guide minor faults in the performance of the ma-
chine, some of which may result from incorrect operation, can be remedied with-
out contacting the Service Department.
This guide may help you to find the reason for the fault, and how to correct it.
This section only lists faults that you can remedy yourself. All other faults are
shown in Fault FXX.
Technical faults
Problem Possible cause and solution
The display remains
dark after the dish-
washer has been turned
on with the sensor
button.
The dishwasher is not plugged in.
Insert the plug.
The circuit breaker has tripped.
Reset the breaker (see data tag for the correct fuse
rating).
If the breaker trips again, contact Miele Customer
Service.
The dishwasher stops
during a program.
The circuit breaker has tripped.
Reset the circuit breaker (see data plate for the
correct fuse rating).
If the circuit breaker trips again, contact Miele
Customer Service.
To Next Page
Loading...
Need help?
General
