15
Functions and features of the
robot vacuum cleaner
The robot vacuum cleaner is suitable for
the daily cleaning of short pile carpets
and fitted carpets, as well as hard
flooring.
Please observe the flooring
manufacturer's cleaning and care
instructions.
The robot vacuum cleaner is fitted with
cameras and sensors. It continually
saves room plans as well as information
regarding areas it can access freely.
The robot vacuum cleaner uses this
data to create an efficient vacuuming
plan of the surfaces to be vacuumed,
which it can then vacuum
autonomously.
Accessories supplied
– Remote control / two batteries
– Two side brushes
– Power supply unit with plug
– Country-specific power adapter
– Base station
– Magnetic strip
Preparing for use
Inserting the side brushes
Place the robot vacuum cleaner
upside down on a level, clean
surface.
Press the two side brushes carefully
onto their pins until they audibly
engage. Take care to comply with the
markings L and R.
Removing the protective foil
Remove the protective foil from the
base station and from the top of the
robot vacuum cleaner.
Placing the batteries in the remote
control
Remove the battery compartment
cover.
Insert the two batteries supplied.
Take care with the polarity.
Close the battery compartment cover.
To Next Page
Loading...
Need help?
General
