30
Switch the robot vacuum cleaner
off before doing any maintenance
work. To switch it off, press the I/0
switch on the side of the robot
vacuum cleaner to the 0 position.
The robot vacuum cleaner and all
plastic accessories can be cleaned with
a dry or a slightly damp cloth, or with a
proprietary cleaner suitable for plastic.
Static charge can cause a build-up of
dust on the vacuum cleaner. This
should be removed using a soft and dry
cloth.
Do not use abrasive cleaning
agents, glass cleaning agents, all-
purpose cleaners or oil-based
conditioning agents!
Do not immerse the robot
vacuum cleaner or any accessories
supplied with it in water!
After sales service
Contact in case of malfunction
In the event of any faults which you
cannot remedy yourself, please contact
Miele Service department.
Contact information for Miele Service
can be found at the end of this
document.
Please note that telephone calls may be
monitored and recorded for training
purposes and that a call-out charge will
be applied to service visits where the
problem could have been resolved as
described in this booklet.
Warranty
For information on country specific
warranty terms and conditions, please
contact Miele Customer Service. See
end of this booklet for contact details.
To Next Page
Loading...
Need help?
General
