Miele K 31222 Ui User Manual

Installation
*INSTALLATION*
63
Installing the appliance
To install the appliance, you will need
the following tools:
Parts required for installation
All installation parts are number coded.
This coding is also used in the installa-
tion instructions.
Preparing the appliance
 Position the refrigeration appliance in
front of the niche.
 Hold the plinth facing at the side and
pull it forwards and off.
You have a choice of two different
ways of securing your appliance:
1. Secured at the top
This method is suitable for securing
the appliance underneath a worktop,
e.g. a laminated one). The worktop
must be suitable for screwing a
bracket on to.
With the appliance feet fully extended
the appliance should sit lightly ten-
sioned between the floor and the
worktop.
2. Secured at the side
This method is suitable for securing
the appliance underneath a solid
worktop, e.g. a granite one). The fur-
niture side walls to the right and left
of the refrigeration appliance must be
suitable for screwing brackets to.
With the feet fully extended the refri-
geration appliance will sit lower than
the worktop.

Miele K 31222 Ui Specifications

General

Door hinge	Right
Control type	Buttons
Product color	-
Reversible doors	Yes
Appliance placement	Built-in
Door panel included	No
Fridge door balconies	2
Number of vegetable drawers	1
Fridge number of shelves/baskets	4
Lamp type	LED
Cord length	1.9 m
Noise level	35 dB
Climate class	SN-ST
Fridge net capacity	137 L
Fridge gross capacity	- L
Current	10 A
Connected load	- W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Annual energy consumption	115 kWh

Weight and Dimensions

Depth	552 mm
Width	597 mm
Height	818 mm
Weight	38100 g
Installation compartment depth	550 mm
Installation compartment width	600 mm
Installation compartment height	870 mm