Interrupting or restarting a
programme
At any time you can...
...interrupt a process:
^
Press the Stop/C button, or open the
appliance door.
The time stops counting down.
...continue a programme:
^
Close the door and press Start.
The process will continue.
Altering entries
If you discover after starting a process
that...
...theMicrowave power level is too
high or too low, you can:
^ select a new level.
...theduration set is too short or too
long, you can:
^
interrupt the programme (press the
Stop/C button once), use the time
selector to set a new time and
continue the programme (press the
Start button),
Or alternatively:
^
the cooking duration can be
increased by pressing the Start
button during operation. Each time
the Start button is pressed, the
cooking duration is increased by
another minute (Exception: the
increased cooking time is in
increments of 30 seconds when the
microwave is being used on
maximum power).
Cancelling a process
^
Press the Stop/C button twice.
At the end of a process
An audible tone will sound when the
cooking process is complete. The
interior lighting goes out.
The audible tone will sound briefly as a
reminder every 5 minutes for 20
minutes after the end of the
programme.
^
If you want to stop the audible tone,
press the Stop/C button.
Keeping warm function
The keeping warm function will switch
on automatically at 80 W for a maximum
of 15 minutes approx. 2 minutes after
the end of a cooking programme which
has used at least 450 W, providing the
door remains closed and no buttons
are pressed.
h,80WandH:H will light up in the
display.
Opening the door or operating one of
the buttons or selectors while the
warming function is in progress cancels
the function.
The keeping warm function cannot be
set as a separate function.
Operation
35
To Next Page
Loading...
Need help?
General
Weight and Dimensions
