One favourite programme can be
saved in memory. This programme can
be used for your most frequently
cooked recipe. The programme can
have up to 3 stages (e.g.: 1 minute at
600 W, followed by 2 minutes on Grill,
and finally 3 minutes at 150 W + Grill).
Programming
(The example given is for a 3-stage
programme)
^
First select the function for the first
stage.
^ Then select the duration.
^ Press the M button.
1 will light up in the display, and 2 will
flash.
^
Then select the second function and
duration.
^
Press the M button again.
2 will light up in the display, and 3 will
flash.
^
Then select the third function and
duration. Press the M button.
After this third step, you can use the M
button to scroll through your entries and
check them.
^
When you have finished
programming, turn the power
selector to the 12 o'clock position.
^
Start the programme to save the
entries. Only ever run the entire
programme with food in the
appliance.
If there is no food in the appliance,
press the Stop/C button twice as
soon as you have started it so that
the appliance is not damaged by
having no food in it.
1 and 2-stage programmes can be
saved in the same way: the
programming process is finished when
the power selector is in the 12 o'clock
position and the Start button has been
pressed, while pressing the M button
shows the next stage.
Changing an entry
^
Entering a new programme overrides
the previously saved programme.
Saving a favourite programme (memory)
54
To Next Page
Loading...
Need help?
General
Weight and Dimensions
