Operating the tumble dryer
17
How the control field works
The sensor controls react to fingertip contact. If a sensor control is lit, it can be selected.
If a sensor control is brightly lit, this means it is currently selected.
If a sensor control is dimly lit, this means it can be selected.
Sensor controls for the drying levels
After selecting a drying level programme with the programme selector, the recommended
drying level lights up. Drying levels that can be selected are dimly lit.
Drying levels
- sensor control = “Normal plus”
- sensor control = “Normal”
- sensor control = “Hand iron”
- sensor control = “Machine iron”
Drying levels (TOP)
- sensor control = “high” temperature setting
- sensor control = “medium” temperature setting
- sensor control = “low” temperature setting
- sensor control = “cool” temperature setting
Drying levels in payment system operation
- sensor control = “high” temperature setting
- sensor control = “medium” temperature setting
- sensor control = “low” temperature setting
- sensor control = “cool” temperature setting
Indicators
- indicator light: lights up when the fluff filter needs cleaning.
- indicator light: lights up if a fault is present in the ducting.
- indicator light (gas-heated machines only): lights up when the heating is active.
- indicator light (machines with payment system only): lights up when payment has
been made.
- time display: the remaining programme running time is displayed in hours and
minutes. With most programmes, the duration displayed may vary or “jump”. The follow-
ing factors, among others, affect the programme duration displayed: the quantity of laun-
dry, the type of fabric and the residual moisture in the laundry. The electronic module ad-
apts to these parameters and then adjusts the programme duration with increasing accur-
acy.
To Next Page
Need help?
General