Miele PIB 100 User Manual

Switching on
33
CoolDown function

Iron switched off
The heating of the iron switches off
automatically if the iron is not moved for
longer than 3minutes. The message
Iron switched off appears in the display
to indicate that the heating has
switched off. After a certain time, steam
is no longer available. The message
Release stm. button appears in the
display when the steam button is
locked. In this case, unlock the
steam button by pushing the slider
on the iron forwards (see “Ironing”).
 Risk of burning or scalding due
to the hot soleplate.
The soleplate is still hot immediately
after the heating has been switched
off.
Avoid direct contact.
As soon as the iron is moved, or the
steam button has been released, the
iron will start heating up again automat-
ically. The duration for the steam to be
available again depends on the length
of time the heating was switched off.
When the steam ironing system is ready
and steam is available, the message
Ready for use will be shown in the
display on the tower.
 Do not leave the steam ironing
system unattended with the iron or
Steamer connected.
Always switch off at the wall socket
and withdraw the plug before leaving
the steam ironing system unatten-
ded.
Auto-Off function
If the iron or the steamer is not used for
approx. 25minutes, the entire steam
ironing system switches off automatic-
ally.
The steam ironing system is switched
on again by pressing the button on
the control panel.

Miele PIB 100 Specifications

General

Brand	Miele
Model	PIB 100
Category	Iron
Language	English