Miele PIB 100 User Manual

Ironing
34
Steam ironing system PIB 100
a
Steam button 
b
Slider for constant steam provision
c
Power level button 
d
Inflation/suction button
Ironing with steam
The steam ironing system is ready for
use when Ready for use appears in
the display. The burst of steam is con-
trolled by the button on the iron.
When the button is pressed, the fan
on the underside of the ironing board
starts automatically.
When the button is released, the fan
will also stop after a brief run-on time.
When using the steam function for a
long time, make sure the room is well
ventilated, as high air humidity can de-
velop.
Using short bursts of steam
 Briefly press the button and re-
lease it again.
Using continuous steam
 Press the button and at the same
time pull the slider back.
 Release the button again.
While the slider  is pulled back, the
button remains in a locked position.
The steam hose may become warm.
Steam is now emitted continuously.
Stopping the continuous steam func-
tion
 Push the slider forwards.
This will unlock the button again and
the steam burst function is ended.

Miele PIB 100 Specifications

General

Brand	Miele
Model	PIB 100
Category	Iron
Language	English