Cleaning and care
58
Cleaning the housing
Before cleaning the housing,
switch off at the socket and with-
draw the plug.
Depending on the level of soiling, use a
dry or moist soft cloth to wipe the hous-
ing.
Do not use abrasive cleaning agents.
Cleaning the soleplate of the
iron
The soleplate of the iron remains
hot after ironing.
Danger of burning.
Switch off at the wall socket and
withdraw the plug. Let the soleplate
of the iron cool down before you
start the cleaning process.
Depending on the level of soiling, use
a dry or moist microfibre cloth to
clean the iron soleplate.
Only use the microfibre cloth to clean
the iron soleplate!
To avoid damaging the surface, do
not use the following for cleaning:
- abrasive cleaning agents, (e.g.
powder cleaners, cream cleaners,
chrome polish, eraser blocks).
- hard, abrasive brushes or sponges,
(e.g. pot scourers), or sponges which
have been previously used and still
contain abrasive cleaning agents.
- pointed objects.
To Next Page
Loading...
Need help?
General
