If your machine is fitted with a
payment system, the programme will
lock after 3 minutes and it is then no
longer possible to cancel or alter it.
To cancel a programme
You can cancel a programme at any
time after it has started.
^
Turn the programme selector to
Finish.
The suds will be pumped away and the
programme is cancelled.
^ Press the Door button.
^ Remove the laundry
or
^ Close the door and start a different
programme.
To interrupt a programme
^ Switch the machine off with the K
button.
To continue with the same programme:
^
Switch the washing machine back on
again with the K button.
^
Confirm the message shown in the
display, and then press the Start
button.
To alter a programme
To alter a wash programme
After the start of a programme it is not
possible to select a different
programme.
You will need to cancel the current
programme before you can select a
new one.
To alter the temperature
With some programmes it is possible to
select a different temperature up to 5
minutes after the programme has
started.
^ Press the OK button to highlight the
temperature. You can use the + or –
button to alter the temperature.
Confirm with OK.
To alter the spin speed
^ Press the OK button repeatedly until
the spin speed is highlighted. You
can use the – and + buttons to
change the spin speed up until the
final spin begins.
Pre-wash
It is not possible to select or de-select
Pre-wash
Changing the programme sequence
33
To Next Page
Loading...
Need help?
General
