^
Use a spirit level to check the
machine is standing level.
^ Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again
using the spanner supplied until it
sits firmly up against the housing.
,
All four counter nuts must sit
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is the danger of the machine
moving about.
Securing the machine to prevent it
slipping
^
Secure both front feet on the washing
machine using the fixing brackets
supplied.
^ Follow the fitting instructions
supplied.
Installation and connection
58
To Next Page
Loading...
Need help?
General
