Installing the machine
^ Remove the packaging and position
the machine where you want to use it.
,
Ensure the machine is stable
during transportation.
This washer-extractor is not suitable
for building under.
The machine must be permanently
connected to the electricity supply
so that the door can be opened. For
this reason, it must not be
connected to devices such as timers
which would switch it off
automatically.
Please place the sticker supplied, with
the following text, near your machine.
"The machine must be permanently
connected to the electricity supply so
that the door can be opened. Do not
open by force."
,Do not install the machine near
or directly above an open gully or
floor drain. Moisture from these can
penetrate the machine and damage
electrical components.
Installation and connection
54
To Next Page
Loading...
Need help?
General
