With the help of the following notes, minor faults in the performance of the
machine, some of which may result from incorrect operation, can be put right
without contacting the Miele Professional Service Department. Please note,
however, that a call-out charge will be applied to service visits where the problem
could have been rectified as described in these operating instructions.
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in accordance with local and national safety
regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem Possible cause Remedy
The display remains
dark and the
programme selector
is not lit up.
There is no power to
the machine.
Check whether
– the electricity supply to the
machine is switched on.
– the fuse or circuit breaker
has tripped.
The programme
does not start when
Drain/Spin has been
selected.
The machine has not
been prepared for
using for the first time.
Prepare the machine as
described in Before using for
the first time.
The display is dark. The display has
switched off
automatically to save
energy (Standby
mode).
Press a button. Standby comes
to an end.
Problem solving guide
43
To Next Page
Loading...
Need help?
General
