Parking system
A parking system has been designed
for conveniently parking the vacuum
cleaner during pauses.
^
Slot the floorhead into the parking
attachment at the back of the vacuum
cleaner.
Storage
^ Stand the vacuum cleaner upright
when it is not being used and when it
is being stored.
^ Slot the floorhead downwards into the
parking attachment on the side of the
vacuum cleaner.
^ If your vacuum cleaner has a
telescopic tube, retract it fully so that
it takes up less room for storage.
If your vacuum cleaner has an
EasyLock suction tube, you can store it
as follows:
^
Press the release button on the
bottom section to separate the two
sections of the suction tube.
^
Push the connection piece of the top
section onto the bottom section.
Parking and storing the cleaner
14
To Next Page
Loading...
Need help?
General
Weight and Dimensions
