EasyManuals Logo
Home>Miele>Vacuum Cleaner>Scout RX1

Miele Scout RX1 User Manual

Miele Scout RX1
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
After approx. 60 seconds the robot
vacuum cleaner will switch into
standby. The battery status indicator
will continue to light up.
The robot vacuum cleaner is reactivated
by pressing any button on the remote
control or one of the two sensors in the
display.
Connect the base station (dia.5-9)
^
Open the storage compartment at the
back of the base station.
^
Insert the power unit connector
supplied into the socket.
^ Connect the mains connection cable
supplied to the power supply unit
and the mains plug to an electrical
socket. The contact indicator on the
base station will light up red.
^ Stow the power supply unit in the
storage compartment in the base
station.
^ Place the base station on a level
surface against a wall. Ensure that
there is an obstacle free distance of
at least 1.5 m in front and 0.5 m to
the right and left of the base station.
Charge the rechargeable battery
(dia. 10)
The rechargeable battery is supplied
not fully charged. It needs to be
charged fully before first use.
The battery can also be charged
when the robot vacuum cleaner is
switched off (OFF switch). In this
case, the vacuum cleaner indicators
will not react.
^
Connect the robot vacuum cleaner to
the charging contacts on the base
station.
Do not lift the robot vacuum cleaner
by the area around the dust box as
it can come loose.
The base station contact indicator will
go out as soon as the robot vacuum
cleaner has been positioned correctly.
The battery will charge and the battery
status indicator will flash in the display.
The charging process takes up to
120 minutes and is complete when the
battery status indicator in the display
lights up green. You can then vacuum
for up to two hours.
You can also charge the battery without
using the base station directly via the
power supply unit.
^ Insert the power supply unit
connector into the socket on the side
of the robot vacuum cleaner (dia. 11).
^
Connect the mains connection cable
to the power supply unit and the
mains plug to an electrical socket
(dia. 7).
Rechargeable battery status
indicator in the display
red charged capacity
approx. 0% - 20%
orange charged capacity
approx. 20% - 50%
green charged capacity
approx. 50% - 100%
en
39

Table of Contents

Other manuals for Miele Scout RX1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele Scout RX1 and is the answer not in the manual?

Miele Scout RX1 Specifications

General IconGeneral
ShapeRound
Product colorBlack
Built-in displayYes
Dust container type-
Number of programs4
Dust capacity (total)- L
Vacuum cleaner programsAuto, Corner, Manual, Spot, Turbo
Floor surfaces supportedCarpet, Laminate, Parquet
Battery life150 m²
Charging time2 h
Battery capacity2200 mAh
Weight and Dimensions IconWeight and Dimensions
Width- mm
Height88 mm
Diameter350 mm

Related product manuals