Timer
28
Switching off a cooking zone
automatically
You can set a time after which the
cooking zone will switch off automatic-
ally. This function can be used for all
cooking zones at the same time.
The switch-off time is set with the nu-
merical keybank for each cooking
zone you want to switch off automat-
ically.
If the time programmed is longer than
the maximum operational time al-
lowed, the safety switch-off will switch
off the cooking zone after the max-
imum permitted safety time has
elapsed (see “Safety switch-off”).
Select a power setting for the cook-
ing zone you require.
Touch the sensor control.
The indicator light will start to flash.
Set the required time.
If you want to set another cooking
zone to switch off automatically, fol-
low the same steps as described
above.
If more than one switch-off time is
programmed, the shortest time re-
maining will be displayed, and the cor-
responding indicator light will flash.
The other indicator lights will light up
constantly.
If you want to show the time remain-
ing for another zone which is count-
ing down in the background, touch
the sensor repeatedly until the in-
dicator light for the zone you require
flashes.
Changing the switch-off time
Touch the sensor repeatedly until
the indicator light for the zone you re-
quire flashes.
Set the required time.
Deleting the switch-off time
Touch the sensor repeatedly until
the indicator light for the zone you re-
quire flashes.
Touch the0 sensor control on the nu-
merical keybank.
To Next Page
Loading...
Need help?
General
