Additional functions
29
Stop&Go
The set power level is reduced to 1
when the Stop&Go function is activ-
ated.
The power levels and timer settings
cannot be changed; the wok can only
be switched off. The minute minder,
switch-off, booster and AutoBoost
times continue to run.
If the function is deactivated, the appli-
ance switches back to the power level
that was set last.
If the function is not deactivated within
1hour, the wok will switch off.
Activating/Deactivating
Touch the sensor control.
Recall
If the SmartLine element is accidentally
switched off during use, you can use
this function to restore all the settings.
The SmartLine element must be
switched on again within 10seconds.
Switch the SmartLine element on
again.
The previously set power levels flash.
Press one of the flashing power level
indicators immediately.
The appliance will continue to operate
using the settings selected previously.
To Next Page
Loading...
Need help?
General
