Miele T 8929 WP User Manual

Standby Display
To save energy, the indicator lights
and the display go out and the
indicator light for the Start/Stop
button starts flashing slowly.
To come out of standby mode
^
Press any button.
This will have no effect if a
programme is running.
On
The standby function is activated.
The indicator lights and the display will
go out after 10 minutes,
– if a programme is not selected after
the dryer has been switched on.
– after a programme has started.
However, the display will switch on for
10 minutes at the beginning of the
anti-crease phase or at the end of the
programme.
The buzzer (if selected) will sound for
10 minutes at the end of the
programme.
Not in current programme
(Factory default)
As described under "On" above.
However, the indicator lights and
display do not go out 10 minutes after
the programme has started but remain
visible during the programme.
Memory
The electronics will memorise the
drying level and some of the Extra
options selected for the current
drying programme and the duration
of a timed drying programme.
When the programme is chosen again,
these settings will appear in the
display.
Off
(Factory default)
On
Anti-crease
Anti-crease helps prevent creasing, if
laundry is not normally removed im-
mediately after the end of a
programme.
After the programme has finished, the
drum will continue to rotate at intervals
for:
2 hours
(Factory default)
1 hour.
Settings menu
61

Miele T 8929 WP Specifications

General

Brand	Miele
Model	T 8929 WP
Category	Dryer
Language	English