Changing the programme sequence
34
Changing a programme after it
has started
It is no longer possible to change the
selected programme. This prevents the
appliance being operated
unintentionally, e.g. by children.
If you adjust the programme selector,
the symbol will light up in the time
display. The symbol goes out when
you select the original programme.
Cancelling the current programme
Turn the programme selector to the
position.
The programme is cancelled.
You can now select a new programme.
Adding or removing laundry
You have forgotten an item of laundry,
but the programme has already started.
Touch the Start/Add laundrysensor.
The wordAdd will appear in the time
display. The Start/Add laundry sensor
flashes slowly.
Risk of burning when touching
hot laundry in the drum.
You could burn yourself.
Open the door.
Add or remove laundry.
You can also change the programme
selection.
Close the door.
Touch the Start/Add laundrysensor.
The programme will continue.
Exceptions to adding laundry
In some cases, e.g. during the cooling
phase or in the Proofing programme,
you cannot add laundry.
In these cases, the wordAdd is not
displayed.
In exceptional cases, the door can be
opened while the programme is
running.