EasyManuals Logo
Home>Miele>Dryer>TWB 140 WP

Miele TWB 140 WP User Manual

Miele TWB 140 WP
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
Installation
*INSTALLATION*
61
Externally draining condensed
water
Notes
When drying is in progress,
condensed water is pumped into the
condensed water container through
the drain hose which is located at the
back of the dryer.
The condensed water can also be
drained away via the drain hose. The
condensed water container will then not
need to be emptied.
Hose length: 1.49m
Maximum delivery head: 1.50m
Maximum drain hose length: 4.00m
Drainage accessories
Supplied: adapter (b), hose clip (c),
hose holder (e);
Available to purchase: “Non-return
valve” kit for connection to an
external water connection. Non-
return valve (d), hose extension (a)
and hose clips (c) are supplied with
the kit.
Installation conditions requiring a
non-return valve
Danger of condensed water
backflow.
Water could flow back into the
tumble dryer or be drawn into it.
Backflow water could damage the
tumble dryer and also the room in
which it is located.
The non-return valve should be used
if the end of the hose is immersed in
water, or if other water connections
are installed.
Maximum delivery head with non-return
valve fitted: 1.00m
Installation conditions requiring the
fitting of a non-return valve:
Drainage into a laundry tub or floor
gully where the end of the hose is
immersed in water.
Connection to a sink drain outlet.
Connection to a drainage system
already in use by another appliance,
e.g. a dishwasher or washing
machine.
If the non-return valve is incorrectly
fitted the appliance will not drain.
The non-return valve has to be fitted
with the arrow on it pointing in the
direction of flow.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele TWB 140 WP and is the answer not in the manual?

Miele TWB 140 WP Specifications

General IconGeneral
Drum typeHoneycomb
Color nameLotus white
Door hingeLeft
Door styleOpaque door
Cord length2 m
Control typeRotary, Touch
Loading typeFront-load
Drying systemHeat pump
Product colorWhite
Reversible doors-
Appliance placementFreestanding
Inverter technologyYes
Cycle time155 min
Noise level66 dB
Drying classA
Drum capacity7 kg
Refrigerating mediumR290
Refrigerating medium weight110 g
Current13 A
Heat sourceElectric
Connected load1100 W
AC input voltage220 - 240 V
AC input frequency50 Hz
Energy consumption1.7 kWh
Energy efficiency scaleA+++ to D
Power consumption (off)0.3 W
Annual energy consumption208 kWh
Delay start (max)24 h
Weight and Dimensions IconWeight and Dimensions
Depth643 mm
Width596 mm
Height850 mm
Weight58000 g
Depth with door open1077 mm

Related product manuals