Miele TWB120WPT1 User Manual

Changing the program sequence
31
Changing a program once it
has started
You cannot change to another program
once a program has started (this
prevents unintentional alterations).
If you try to change a program,  will
light up until the original program is
reset.
Exception: The dryer is switched off by
turning the program selector to the 
position.
You will need to cancel the current
program before you can select a new
one.
 Risk of fire due to incorrect use
and operation.
The laundry can burn and destroy
the dryer and the surroundings.
Read and observe “IMPORTANT
SAFETY INSTRUCTIONS”.
Cancelling the current program
 Touch the Start/Stop sensor button.
The items will be cooled down,
depending on the temperature reached
and how long they have been dried for.
 will light up if you press the Start/
Stop sensor button again during the
cooling-down phase.
 Open the door.
If you would like to select another
program
You can also directly cancel a running
drying program if you immediately
select another program and start it.
 Turn the program selector to .
 Turn the program selector to another
program.
 Touch the Start/Stop sensor button.
Adding or removing laundry
 Bear in mind that hot steam may
escape when the door is opened.
 Pull open the door.
 Add or remove items.
 Close the door.
 Touch the Start/Stop sensor button.
The program starts.

Miele TWB120WPT1 Specifications

General

Brand	Miele
Model	TWB120WPT1
Category	Dryer
Language	English