Cleaning and care
40
Use a vacuum cleaner with a long
crevice nozzle attached to remove
any visible lint from the upper air flow
openings.
Finally, clean the lint filters with water.
Cleaning the lint filters with water
Wipe the smooth plastic surfaces of
the lint filters with a damp cloth to
clean them.
Rinse the lint filters through with
warm running water.
Shake the lint filters thoroughly and
then dry them carefully.
Ensure the filters are dry before
replacing them. Wet filters could
cause operational faults.
Push the lower lint filter in completely
and lock it with the yellow knob.
Push the upper lint filter in
completely.
Close the door.
To Next Page
Loading...
Need help?
General
