Miele TWB120WPT1 User Manual

Installation
*INSTALLATION*
61
Electrical connection
 GROUNDING INSTRUCTIONS
The electrical safety of this dryer can
only be guaranteed when continuity
is complete between it and an
effective grounding system. It is
essential that this standard safety
requirement is observed and
regularly tested. If in any doubt,
please have the electrical installation
inspected by a qualified electrician.
Miele cannot be held liable for the
consequences of an inadequate
grounding system. The electrical
socket must be easily accessible so
that the dryer can be disconnected
from the electricity supply.
WARNING – If the grounding
conductor is connected incorrectly,
this can result in electric shock.
Contact a qualified electrician if you
are unsure whether the appliance is
properly grounded.
Do not change the plug: If it does not
fit into the socket, you should have a
proper outlet installed by a qualified
electrician.
The dryer is equipped with a 6'7" (2m)
power cord with plug. The dryer is
connected to a NEMA 5-15 socket with
an electrical connection of 120V,
60Hz, 15A.
The manufacturer recommends
operating the appliance on a dedicated
circuit to avoid overloading the
electrical circuit.
Connection adapter for NEMA 14-30
socket
 If a NEMA 14-30 socket is
provided on-site for the dryer, the
Miele connection adapter* can be
used.
Observe the following description to
avoid damage to the dryer.
Useful tip: * You can order the
connection adapter directly from Miele
(USA or CDN).
- The connection adapter has a
NEMA14-30 plug and two
NEMA5-15 socket-side connectors.
The dryer and washing machine can
therefore be connected to the
120V/60Hz electricity supply.
- The connection adapter is equipped
with two 15A fuses which protect
both the connected appliances and
the connection adapter.

Miele TWB120WPT1 Specifications

General

Brand	Miele
Model	TWB120WPT1
Category	Dryer
Language	English