P/N: 0002-08-50038-00 Rev A
11
Panorama® Central Station Interface: Placing a patient in standby on the V12
or V21 bedside monitor automatically places the Panorama Central Station,
WorkStation, and ViewStation in standby. Selecting Bedside and Panorama
Standby on the Panorama Central Station or WorkStation automatically places
the bedside monitor and ViewStation in standby. Touch anywhere on the
screen on the V12 or V21 bedside monitor to remove a patient from standby
as a patient cannot be removed from Standby on the Panorama Central
Station.
PRIVACY MODE
To suspend alarm notification and turn off the display on the V12 or V21
bedside monitor when admitted to the Panorama Central Station:
a. Select Privacy Mode* (Quick Function tab)
Or
a. Select Display (Setup tab) and select Privacy Mode
To remove a patient from Privacy Mode and resume monitoring on the V12 or
V21 bedside monitor touch anywhere on the screen.
Note: If communication is interrupted between the V12 or V21 bedside
monitor and the Panorama Central Station, Privacy Mode is automatically
disabled.
Note: A patient cannot be removed from Privacy Mode from the Panorama
Central Station. The patient must be removed from Privacy Mode on the V12
or V21 bedside monitor.
PRINT
Real-Time Waveforms
To print a strip on a patient on the V12 or V21 bedside monitor:
a. Select Strip in the Navigational Area
b. Select Waveform (modular recorder enabled)
*Configurable
To Next Page
Loading...
Need help?
General
