Mindray V12 Quick Reference Guide

P/N: 0002-08-50038-00 Rev A
16
Quick Reference Guide
V
V
V
Initiate ST Analysis
To initiate ST analysis on the V12 or V21 bedside monitor:
a. Select ST tile and select Setup tab
Or
a. Select Parameters (Setup tab) and Select ST to enter the ST Setup tab
b. Select Analysis and select On
c. Select Accept to save settings and select Done (as needed) to return to
the main screen
12 Lead ECG
Enable 12 Lead ECG
The V12 or V21 bedside monitor allows the clinician to monitor 12 Leads of
ECG and provide a 12 Lead Interpretive Report.
To enable 12 Lead ECG on V12 or V21 bedside monitor:
a. Prep patient’s skin in accordance with hospital policy
b. Attach electrode to lead wire before placing on patient
c. Place electrodes on patient in accordance with hospital policy
d. Insert 12 Lead ECG Module into V-Patient Server (VPS)
e. Select ECG waveform to enter ECG Setup tab
f. Select ECG Cable Type
g. Scroll and select 12 Lead from drop down menu
h. Select Accept to save settings and return to the main screen
View 12 Lead ECG
To view 12 Lead ECG on V12 or V21 bedside monitor:
a. Select View All ECG* (Quick Function tab)
Or
a. Select ECG waveform to enter ECG Setup tab and select View All ECG
b. Select View All ECG a 2nd time to remove viewing of 12 Lead ECG
*Configurable

Mindray V12 Specifications

General

Brand	Mindray
Model	V12
Category	Medical Equipment
Language	English