11
C
ONNECTORS AND INDICATORS
CHAPTER 3 GETTING STARTED
Endpoint Pinout
7 USB2 USB connector
8 SYNC IN 8 KHz TDM synchronization pulse
input
9 SYNC OUT 8 KHz TDM synchronization pulse
output
18 PRI card with PRI port RJ-48 connector for ISDN-PRI
connectivity
16 FXO card with FXO ports RJ-11 connectors offering analog
PSTN access for various VoIP
endpoints such as IP phones, FXS
devices, softphones and IP-based
PBX.
13 ETH1 A 10/100/1000 BaseT Ethernet
RJ-45 connector for access to a
LAN, WAN or computer. This port is
by default used for uplink / WAN
connection.
14 ETH2-ETH3-ETH4/EXT-ETH5/EXT 10/100/1000 BaseT Ethernet
RJ-45 connector for access to a
LAN, WAN or computer. These
ports are used by default for LAN
connections.
12 FXS card with FXS ports RJ-11 connectors to attach a
conventional telephone or G3 fax
11 DSP CARD No connector available.
15 BRI card with 4BRI ports 4 x RJ-48C connectors for BRI
connectivity.
RJ-48 Connector
Pin
NT/TE Settings
EX Controller
Other MX-ONE and MiVoice 5000
Controllers (MXe II, CXi II)
NT Mode TE Mode NT Mode TE Mode
1 TX + RX - RX Ring TX Ring
2 TX - RX + RX Tip RX Tip
# Connectors/Cards Description
To Next Page
Loading...
Need help?
General
