9/1553-ANF 901 54 Uen L1 2016-03-09 30
D
URING CALLS
Note: Not applicable.
5.10.2 COMMON
If your telephone is MNS represented on other telephones, and you park an ongoing
call, then the call is put on common hold. However, if the ongoing call is a conference
member/leader or other access line (Line 1 or Line 2) is already put on common hold,
then common hold is not allowed.
To put a Call on Common Hold:
1. Press the Line key where you have the call in conversation or Hold (F3) menu
key.
2. Replace the handset.
To pick up a call put on common hold:
1. When the call is put on common hold, the MNS key on the represented extension
starts to blink.
2. Press the blinking key to answer the call.
To re-admit a call put on common hold:
1. The call cannot be re-admitted if the call, that is put on common hold, is
answered at the MNS represented extension. Otherwise, press the Line key
where you have the call parked.
2. You have now speech connection with the original conversation partner.
5.11 REFER BACK
During inquiry you can switch between the connected party and the calls parked on
Line 1 and Line 2.
To use
Press the Inquiry key, the Line 1 or the Line 2 key.
To end
1) Press the Inquiry key, the Line 1 or the Line 2 key.
2) Press the Clear key.
5.12 SUFFIX DIALING (DIALING DURING SPEECH)
When communicating with and controlling a voice mail system, or for example,
retrieving information through your telephone about your bank account, you need to
use Dual Tone Multi-Frequency (DTMF) signals, this is known as suffix dialing. The
suffix dialing function is permanently active for all calls in speech.
All digits entered are automatically converted by the exchange into DTMF signals
which are then transmitted along the connected lines.
To Next Page
Loading...
Need help?
General
