9/1553-ANF 901 54 Uen L1 2016-03-09 42
O
THER FEATURES
9 OTHER FEATURES
9.1 ACCOUNT CODE
9.1.1 GENERAL
The feature account code provides two different functions:
• Charge a call to an account code instead of charging it to the calling extension’s
number.
• Prevent unauthorized telecommunication use by forcing the user to dial an
account code before dialing an external number.
Extensions and the external numbers for Least Cost Routing (LCR) can be initiated
with account code categories. With these two categories it is possible to decide if the
user will have forced or optional account code dialing.
Forced
Means that the user must have dialed a valid account code before the destination
number otherwise the call is rejected.
Optional
Means that it is not necessary with an account code for the call. The call is in this
case always accepted.
The procedure for account code normally has to be dialed before the wanted number.
It is also possible to tie an account code to an ongoing call, both incoming and outgoing.
Any previous stored account code will than be overwritten.
9.1.2 PROCEDURE
9.1.2.1 Pre-dialing of Account Code
1) Lift the handset.
2) Dial the procedure for account code *61* account code#, where 61 is the stan-
dard function code for using account code. If provided, dial tone is received.
3) Continue with the external number. If the category check is negative (in case of
forced account code dialing) the call is rejected.
4) After conversation replace the handset.
9.1.2.2 Dialing of Account Code in Speech
Note: Not applicable.
9.2 ALARM EXTENSION
An alarm telephone is assigned characteristics similar to an alarm center. A call to this
extension obtains automatic intrusion if the extension is busy. Up to 7 callers can be
connected to the alarm extension at the same time.
To Next Page
Loading...
Need help?
General
