TV
Menus
17
Lock
Controlling
TV Usage
This
feature restricts the access according to the
U.S.
based program ratings, the time of day or by the channels.
Restricting the access using the non-U.S. based ratings
(Alternate Rating System) can be setup from the 'Other'
submenu.
o
To
setup the restriction
or
to watch TV during the
restricted condition, pass code is required.
o Pass code menu is prompted whenever Lock is
selected on the main menu.
Setting
a Pass
Code
o Input four-digit pass code using the number keys
on the remote control.
o Press
[CANceL!
to delete a number and move back
one space.
o Press
@)or
l§
to close the menu without setting
a pass code.
o Press
l@lli)to
set the pass code.
o If you forget the pass code: press the number 9 and
LAST key on the remote at the same time.
Resetting
a Pass
Code
The old pass code is deleted when entering the Lock
menu, and prompts you
to
enter a new pass code.
L L S V
MOVlt'
'>I.lrt
'>tot>
.....
,,"9
R.,l
hn
9
T,mp
TI"'~
./
Off
TVY
C
110QPM
I}
00
PI\,'
0"
TV
Y7
P(.
IV
(,
"<'
j
IV
PC
,
" "
,:
"
VA
,
~Ol
''''.·d
Lock by Program Ratings:
o Restricts access
to
the TV using U.S. ratings sent
by the broadcasters.
o Lock applies only
to
ANT and composite jacks.
Some signals
do
not contain rating information
and unable to lock.
o
To
lock for
24
hours, set the same time for Start
~
Time and Stop Time.
o •
Lock by Time:
o Blocks all use of the TV during the specified time
period.
o Requires pass
code
to view during the locked
time.
Lock Control Panel:
o Disables the buttons on the TV's control panel.
o Press and hold ACTIVITY button from the panel
for about
10
seconds to unlock if the remote
control is not available.
Lock by Other Program Ratings:
o Restricts access using non-U.S. based ratings
sent by broadcasters.
o Grayed out
if
the Other rating is not detected
in
the broadcasted signal.
Note: Other rating locks apply only to digital channels
and signals received on the
ANT.
To Next Page
Loading...
Need help?
General
