Mitsubishi AL2-10-MRD User Manual

24
6.2 Simulate your program
Now you can switch to simulation mode to verify your program operates as specified.
6.3 Configure your COM port
1. Click Com|Configuration.
2. Select the ComPort option.
3. Use the list to select your COM port
4. Click Test to verify this is the correct port
5. Click OK.
Click this button to switch to Simulation mode
Double-click the buttons to simulate a momentary switch
Q u i c k S t a r t G u i d e
Mitsubishi Alpha / Alpha2
Programmable Controller

Mitsubishi AL2-10-MRD Specifications

General

Brand	Mitsubishi
Model	AL2-10-MRD
Category	Controller
Language	English