Mitsubishi CNC Meldas HC Series User Manual

i
Introduction
Thank you for purchasing the Mitsubishi CNC.
This specification manual describes the specifications of the HC Series servomotor that
can be driven with the Mitsubishi NC servo amplifier. The handling methods may differ
according to the combined servo amplifier, so refer to the respective servo amplifier
instruction manual when using.
Precautions for safety
The safety precautions in this Specification manual are ranked as "DANGER" and
"CAUTION".
DANGER
When a dangerous situation may occur if handling is mistaken
leading to fatal or major injuries.
CAUTION
When a dangerous situation may occur if handling is mistaken
leading to medium or minor injuries, or physical damage.
Note that some items described as
CAUTION
may lead to major results
depending on the situation. In any case, important information that must be observed
is described.
The signs indicating prohibited and mandatory items are described below.
This sign indicates that the item is prohibited (must not be
carried out). For example, is used to indicate "Fire
Prohibited".
This sign indicates that the item is mandatory (must be carried
out). For example, is used to indicate grounding.
After reading this Specification Manual, keep it in a safe place for future reference.
POINT
In this manual, this mark indicates important matters the operator
should be aware of when using the CNC.

Mitsubishi CNC Meldas HC Series Specifications

General

Brand	Mitsubishi
Model	CNC Meldas HC Series
Category	Engine
Language	English