INTAKE MANIFOLD
TSB Revision
INTAKE AND EXHAUST
15-14
>>B<< O-RING/MANIFOLD ABSOLUTE
PRESSURE SENSOR INSTALLATION
CAUTION
• Install the manifold absolute pressure sensor, taking
care that no shock is applied to it.
• Do not use a manifold absolute pressure sensor that
has been dropped.
1. Apply a small amount of new engine oil to the O-ring.
2. Install the manifold absolute pressure sensor to the intake
manifold with care not to damage the O-ring.
INSPECTION
M1151003101170
.
INTAKE MANIFOLD CHECK
1. Check the intake manifold for damage and cracks, and
replace it if necessary.
2. Check the vacuum outlet port for clogging, and clean it if
necessary.
To Next Page
Loading...
Need help?
General
