Mitsubishi FX3G Series Programming Manual

897
FX3G/FX3U/FX3GC/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
A Programming Tool Applicability and Version Upgrade History
A-2 Peripheral product applicability (except programming tools)
31
FNC276-FNC279 Data Transfer 3
32
FNC280-FNC289 High-Speed Processing 2
33
FNC290-FNC299 Extension File Register
34
FNC300-FNC305 FX
3U
-CF-ADP
35
SFC•STL Programming
36
Interrupt Function
37
Special Device
38
Error Code
A
Version Up Information
B
Execution Times
Appendix A-2 Peripheral product applicability (except programming tools)
Appendix A-2-1 Peripheral product applicability
FX3G/FX3GC PLCs
*1. The F940GOT and ET-940 whose version is earlier than Ver. 1.10 do not support the transparent (2-port)
function of the GX Developer.
Product Name Applicability Remarks
GOT1000 Series Applicable
Standard monitor OS, communication driver and option OS which support the FX3G/FX3GC
PLC are required.
For details, refer to the GOT manual.
This series is subject to the following restrictions when connected using unsupported
standard monitor OS, communication driver or option OS.
Contents of restrictions
• Programming is enabled only in the function ranges such as instructions, device ranges
and program sizes available in the FX1N and FX1NC PLCs.
• The list editor function for MELSEC-FX is not available. When using the list editor
function for MELSEC-FX, upgrade the standard monitor OS, communication driver and
option OS to the version compatible with the FX3G PLC.
Check the applicability of other items in the GOT manual.
F940WGOT Not applicable The following restriction applies when connected.
Contents of restrictions
• Programming is enabled only in the function ranges such as instructions, device ranges
and program sizes available in the FX1N and FX1NC PLCs.
→ For applicable models, refer to the GOT manual.
For connection using the 2-port interface function
*1
, refer to Appendix A-1-4.
F940GOT,
F940 Handy GOT
Not applicable
F930GOT (-K) Not applicable
F920GOT (-K) Not applicable
ET-940 Not applicable
FX-10DM (-SET0) Not applicable
The following restriction applies when connected.
Contents of restrictions
Programming is enabled only in the function ranges such as instructions, device
ranges and program sizes available in the FX
1N and FX1NC PLCs.
→ For supported models and device ranges, refer to the FX-10DM USER’
MANUAL (Manual No. JY992D86401).
FX-10DU Not applicable
The following restriction applies when connected.
Contents of restrictions
It is limited to the device range and function range supported by the highest class model
(FX1N or FX1NC) applicable in the product version.
→ For supported models and device ranges, refer to the FX-10DU
Operation Manual (Manual No. JY992D34701).

Mitsubishi FX3G Series Specifications

General

Brand	Mitsubishi
Model	FX3G Series
Category	Controller
Language	English