Mitsubishi FX3G Series Programming Manual

900
FX3G/FX3U/FX3GC/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
A Programming Tool Applicability and Version Upgrade History
A-3 Version Upgrade History
Appendix A-3-2 Version check
Special data register D8001 (decimal) contains information for determining the PLC version. Or for the FX3U and
FX3UC PLCs, the PLC version can be verified in "PLC Status" within the display module.
→ For the operating procedure of the display module,
refer to the Hardware Edition Manual of the PLC to be checked.
Appendix A-3-3 Version upgrade history [FX3G]
→ For the manufacturer’ serial number check method, refer to Appendix A-3-1.
Appendix A-3-4 Version upgrade history [FX3GC]
→ For the manufacturer’ serial number check method, refer to Appendix A-3-1.
Version
Manufacturer’s
serial number
Contents of version upgrade
Ver. 1.00
86****
(June, 2008)
First product
Ver. 1.10
8X****
(October, 2008)
• Supports following 15 instructions:
FLT(FNC49), VRRD(FNC85), VRSC(FNC86), ECMP(FNC110), EMOV(FNC112),
EADD(FNC120), ESUB(FNC121), EMUL(FNC122), EDIV(FNC123),
ESQR(FNC127), INT(FNC129), IVCK(FNC270), IVDR(FNC271), IVRD(FNC272),
IVWR(FNC273)
• Supports connection of FX3G-8AV-BD, FX3G-2AD-BD, and FX3G-1DA-BD.
• Supports connection of display module (FX3G-5DM).
• Supports the floating point operation function.
• Supports the inverter communication function.
• Supports the pulse width/pulse period measurement function.
Ver. 1.20
96****
(June, 2009)
• Supports connection of following analog special adapters:
-FX3U-3A-ADP
• Supports the hardware error function of FX3U-4DA-ADP.
Ver. 1.40
111****
(January, 2011)
• Supports the following instructions:
IVMC(FNC275)
Ver. 2.00
124****
(April, 2012)
• Supports the following functions of the FX3U-16CCL-M:
- Network parameter
- Accessing the other station from CC-Link
- Remote device station initialization procedure registration
- CC-Link diagnostics
• Special parameter error (M8489 and D8489) is added.
Version
Manufacturer’s
serial number
Contents of version upgrade
Ver. 1.40
121****
(January, 2012)
First product
Corresponds to FX3G PLC Ver. 1.40.
Ver. 2.00
124****
(April, 2012)
• Supports the following functions of the FX3U-16CCL-M:
- Network parameter
- Accessing the other station from CC-Link
- Remote device station initialization procedure registration
- CC-Link diagnostics
• Special parameter error (M8489 and D8489) is added.
D8001
PLC type and
version
2 4 1 0 0
Version information (Example: Ver. 1.00)
PLC type (Example: 24 = FX
2N
/FX
2NC
/FX
3U
/FX
3UC
PLCs)

Mitsubishi FX3G Series Specifications

General

Brand	Mitsubishi
Model	FX3G Series
Category	Controller
Language	English