40
No. Name Description
[6]
Power supply
input terminals
Used to connect 100 V AC to 200 V AC power supply.
[7] Terminal screw M3.5 × 7
[8] Terminal cover The protective cover of the terminal block.
[9]
Module fixing
screw
Used to fix the module to the base unit.
(M4 screw, tightening torque: 78 to 118 N⋅cm)
POINT
(1) Do not cable to the unused terminals such as FG and LG on the terminal block
(terminals whose name is not printed on the terminal cover).
(2) Be sure to ground the terminal LG to the protective ground conductor with class D
(class-3) grounding or above.
To Next Page
Loading...
Need help?
General
