Mitsubishi MELSEC Q Series Structured Programming Manual

1-4
1.2 Generic Terms and Abbreviations in This Manual
1.2 Generic Terms and Abbreviations in This Manual
This manual uses the generic terms and abbreviations listed in the following table to discuss the
software packages and programmable controller CPUs. Corresponding module models are also
listed if needed.
Generic term and
abbreviation
Description
GX Works2 Generic product name for the SWnDNC-GXW2-E (n: version)
CPU module Generic term for the High Performance model QCPU and Universal model QCPU
High Performance model
QCPU
Generic term for the Q02, Q02H, Q06H, Q12H, and Q25H
Universal model QCPU
Generic term for the Q02U, Q03UD, Q03UDE, Q04UDH, Q04UDEH, Q06UDH, Q06UDEH, Q13UDH,
Q13UDEH, Q26UDH, and Q26UDEH
Personal computer
Generic term for personal computer on which Windows
®
operates
IEC61131-3 Abbreviation for the IEC 61131-3 international standard
Common instruction Generic term for the sequence instructions, basic instructions, and application instructions
Special instruction Generic term for the PID control instructions and module dedicated instructions

Mitsubishi MELSEC Q Series Specifications

General

Series	MELSEC Q Series
Type	Modular PLC
Programming Software	GX Works2, GX Works3
Category	Programmable Logic Controller (PLC)
I/O Modules	Digital I/O, Analog I/O, High-Speed Counter, Positioning
Communication	Ethernet, CC-Link
Programming Languages	Ladder Logic, Structured Text, Function Block Diagram, Sequential Function Chart, Instruction List
Memory	Flash Memory
I/O Points	Up to 4096 points (expandable with additional modules)
Power Supply	AC or DC power supply options available, depending on the base unit and modules.
Mounting	DIN rail mounting
Operating Temperature	0°C to 55°C
Storage Temperature	-25°C to 75°C
Humidity	5% to 95% (non-condensing)
Vibration Resistance	10 to 57 Hz, 0.075mm amplitude
Weight	Varies depending on the module, from a few grams to several kilograms.
Shock Resistance	147 m/s² (3 times each in X, Y, Z directions)