Mitsubishi MELSEC Q Series Structured Programming Manual

2-6
2.1 How to Read Function Tables
2.1.10 Standard edge detection function blocks
2.1.10 Standard edge detection function blocks
2.1.11 Standard counter function blocks
2.1.12 Standard timer function blocks
Function name Argument Processing details Page
RTRIG(_E)
,
Detects the rising edge of a signal and outputs pulse signals.
5-190
F_TRIG(_E)
,
Detects the falling edge of a signal and outputs pulse signals.
5-192
Function name Argument Processing details Page
CTU(_E)
, , , ,
Counts the number of times that the signal turns ON.
5-194
CTD(_E)
, , , ,
Counts down the number of times that the signal turns ON.
5-197
CTUD(_E)
, , ,
, , ,
Counts/counts down the number of times that the signal turns ON.
5-200
COUNTER_FB_M
, , , , Counts the number of times that the signal turns ON from to .
5-203
Function name Argument Processing details Page
TP(_E)
TP_HIGH(_E)
, , ,
Holds the signal ON for the specified time.
5-205
TON(_E)
TON_HIGH(_E)
, , , ,
Turns ON the signal after the specified time.
5-208
TOF(_E)
TOF_HIGH(_E)
, , ,
, , ,
Turns OFF the signal after the specified time.
5-211
TIMER_10_FB_M
TIMER_100_FB_M
TIMER_HIGH_FB_M
TIMER_LOW_FB_M
TIMER_CONT_FB_M
TIMER_CONTHFB_M
, , , ,
Turns ON the signal after the specified time counted from input value
to .
5-214
s1 d
s1 d
s1 s2 s3 d1 d2
s1 s2 s3 d1 d2
s1 s2 s3 s4
s5 d1 d2 d3
s1 s2 s3 d1 d2 s3 s2
s1 s2 d1 d2
s1 s2 s3 d1 d2
s1 s2 s3 s4
s5 d1 d2 d3
s1 s2 s3 d1 d2
s3 s2

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English