Mitsubishi RCN-EK2 User Manual

-
12
-
❚
12. FILTER SIGN
If the FILTER SIGN LED blinks as shown below, clean the filter.
■
Ceiling suspended (FDE)
TIMER/CHECK LED
■
Ceiling cassette (FDT)
■
Ceiling cassette-4 way Compact (FDTC)
■
Ceiling cassette (FDTS)
TIMER/CHECK LED
TIMER
CHECK RUN
■
Floor standing -2way- (FDFW-KXE6)
TIMER/CHECK LED
■
Ceiling cassette (FDTW)
TIMER/CHECK LED
CHECK1
CHECK2 TIMER/CHECK RUN
For FDE, FDT, FDTC, FDTS or FDTW
•
The TIMER/CHECK LED long-blinks (stays on for two
seconds and shuts off for one second).
•
When filter cleaning is complete, press the FILTER
button on the remote control to reset the filter.
■
Wall mounted (FDK)
~56 71~
TIMER/CHECK2 LED
For FDK
•
The TIMER/CHECK2 LED long-blinks (stays on for two
seconds and shuts off for one second).
•
When filter cleaning is complete, press the FILTER
button on the remote control to reset the filter.
■
RCN-KIT4-E2
CHECK MODE
FILTER
CHECK
RUN/
CHECK
ON/
OFF
CHECK
TIMER
For RCN-KIT4-E2
•
The FILTER SIGN LED long-blinks (stays on for two
seconds and shuts off for one second).
•
When filter cleaning is complete, press the FILTER button
on the remote control to reset the filter.
NOTICE
The FILTER SIGN setting time can be changed in the
indoor function setting. The default is set to 180 hours.
FILTER SIGN
LED
PJZ012A128_EN.indd 12PJZ012A128_EN.indd 12 11/10/2016 6:53:24 PM11/10/2016 6:53:24 PM

Mitsubishi RCN-EK2 Specifications

General

Brand	Mitsubishi
Model	RCN-EK2
Category	Remote Control
Language	English