MOTORGUIDE WIRELESS
90-MM5981 For Questions, Contact Consumer Affairs at #1-920-929-5040 17
© 2005, MotorGuide www.motorguide.com
Activa
ach foot-pedal has a unique electronic ID number. Up to four electronic ID
umbers (Digital Remote Control units and foot-pedals) can be stored by
our receiver. For your foot-pedal to respond to your commands only and not
ose of other boaters, you must activate the electronic ID number into your
ceiver. Follow the instructions below (one time only) to activate each new
mote control device:
1. Power the motor up - within 10 seconds, pre ld the “+” and “-“
buttons on the foot-pedal simultaneously
2. Listen for a long beep
3. The receiver has now learned and stored the electronic ID number of
the foot-pedal.
you are activating multiple remote control devices (up to four devices
mo ated) t motor d back on
ati each remote c
o erase all electronic ID numbers stored in the receiver’s memory:
ting the Foot-Pedal Electronic ID
E
n /or
y
th
re
re
ss and ho
If
NOTE
can be accom d he must be powered off an
between activ ng ontrol device.
Erasing the Receiver’s Memory
T
1. Power-up the motor
2. Within 10 seconds, press and hold the “Left”, “Right”, “+” and “-“
buttons on the foot-pedal simultaneously
3. Listen for a long beep indicating the receiver has erased all stored
electronic ID numbers
To Next Page
Loading...
Need help?
General
