Motorola APX 2000 User Manual

• Press the Menu Select button directly below
Cnts to scroll through and select the required
ID.
• Press the Menu Select button directly below
LNum to go to the last number dialed.
• or to the required phone number.
• Use the keypad to enter the required phone
number.
4 Press the PTT button to dial the phone number.
5 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
6 When your call is answered, press and hold the
PTT button to talk. Release the PTT button to
listen.
7
Press to return to the Home screen.
See Phone Call Displays and Alerts on page 60 for
more information if your call is NOT answered.
Switching Between Repeater or Direct
Operation Button
The Repeater Operation increases the radio’s range
by connecting with other radios through a repeater.
The transmit and receive frequencies are different.
The Direct or “talkaround operation” allows you to
bypass the repeater and connect directly to another
radio. The transmit and receive frequencies are the
same.
Perform one of the following actions:
• Press the preprogrammed Repeater/Direct
switch to toggle between talkaround and
repeater modes.
•
or to Dir and press the Menu Select
button directly below Dir.
The display shows Repeater mode if the radio is
currently in Repeater mode.
The display shows Direct mode and the Talkaround
icon if the radio is currently in Direct mode (during
conventional operation only).
General Radio Operation
71
English

Motorola APX 2000 Specifications

General

Brand	Motorola
Model	APX 2000
Category	Two-Way Radio
Language	English