Motorola APX 2000 User Manual

• Call ID (Number)
• Call Type (Icon)
• WACN ID (Astro 25 Trunking IDs only)
• System ID
Note: Your radio must be preprogrammed to allow
you to add, edit, or delete the contact entries.
Your radio also supports a maximum of 50 call lists.
Each list can store up to 100 IDs (numbers).
Note: Your radio is preprogrammed with a number of
contacts per Call Lists. Check with your dealer or
system administrator for more information.
The radio automatically exits the feature, if the feature
inactivity timer is enabled, when the radio is left idle
and the timer expires. You hear the Menu Inactive
Exit Tone upon feature exit.
Making a Private Call from Contacts
Your radio must be preprogrammed to allow you to
use this feature.
1
or to Cnts and press the Menu Select button
directly below Cnts.
The entries are alphabetically sorted.
2 or to the required subscriber alias.
3 Perform one of the following actions:
• Press the Menu Select button directly below
Optn and proceed to the next step.
•
or to scroll through the available IDs for
the selected subscriber alias and proceed to
step 6.
4
or to Call and press the Menu Select
button directly below Sel.
5 or to select the call type.
6 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
7 Press the PTT button to initiate the call.
During the call, the display shows the subscriber
alias.
8 Press and hold the PTT button to talk. Release the
PTT button to listen.
The LED lights up solid red when the PTT button
is pressed.
Advanced Features
81
English

Motorola APX 2000 Specifications

General

Brand	Motorola
Model	APX 2000
Category	Two-Way Radio
Language	English