Motorola CD5 Series User Manual

37
Handset settings
8.1.3 Switch auto volume control on/o
Auto volume control function, controls the ringer volume of the handset before
the handset rings. You can set the handset to detect the level of sound in
the local environment and if it is louder than the level set in the handset the
handset will ring at maximum level for that call.
1. Press
Menu , scroll u to Settings and press OK .
2. The display shows
Handset settings . Press OK .
3.
Sounds is displayed. Press OK .
4. The display shows
Ringing . Press OK .
5. Scroll
d to Auto vol. control and press OK .
6. The display shows
On/O . Press OK .
7. Scroll
u or d to select either On or O .
8. Press
OK to confirm.
9. Press e to return to standby.
8.1.4 Auto volume control level
There are 5 levels to choose from
Very low , Low , Mid , High , and Very high .
1. Press
Menu , scroll u to Settings and press OK .
2. The display shows
Handset settings . Press OK .
3.
Sounds is displayed. Press OK .
4. The display shows
Ringing . Press OK .
5. Scroll
d to Auto vol. control and press OK .
6. Scroll
d to Sensitivity and press OK .
7. Scroll
u or d to select the required level.
8. Press
OK to confirm.
9. Press e to return to standby.
8.1.5 Key tones on/o
When you press a key on the handset you hear a beep. You can switch these
beeps on or o.
1. Press
Menu , scroll u to Settings and press OK .
2. The display shows
Handset settings . Press OK .
3.
Sounds is displayed. Press OK .
4. Scroll
d to Tones . Press OK .
5. The display shows
Keypad tones . Press OK .
6. Scroll
u or d to select Tones on or Tones o.
7. Press OK to confirm.
8. Press e to return to standby.

Motorola CD5 Series Specifications

General

Brand	Motorola
Model	CD5 Series
Category	Cordless Telephone
Language	English