Motorola CD5 Series User Manual

40
Advanced settings
9. Advanced settings
9.1 Base ringer volume
You can adjust the ringer volume and set dierent volume levels. Choose from
5 volume levels or O.
1. Press
Menu , scroll u to Settings and press OK .
2. Scroll
d to Advanced settings . Press OK .
3.
Base sounds is displayed. Press OK .
4. The display shows
Ringing . Press OK .
5. The display shows
Ringing volume and press OK .
6. Scroll
u or d to adjust the ringer volume level.
7. Press
OK to confirm.
8. Press e to return to standby.
9.2 Dial mode
The default CD5 dialing mode is suitable for your country and network
operator. It is unlikely that you should need to change this setting unless
advised to do so.
1. Press
Menu , scroll u to Settings and press OK .
2. Scroll
d to Advanced settings . Press OK .
3. Scroll
d to Dial Mode . Press OK .
4. Scroll
u or d to select Tone or Pulse .
5. Press
OK to confirm.
6. Press e to return to standby.
9.3 Flash time
This setting is useful to access certain network and PABX/switchboard
services.
The default CD5 flash time is suitable for your country and network operator. It
is unlikely that you should need to change this setting unless advised to do so.
1. Press
Menu , scroll u to Settings and press OK .
2. Scroll
d to Advanced settings . Press OK .
3. Scroll
d to Flash time . Press OK .
4. Scroll
u or d to select the setting you want: Short , Medium , Long .
5. Press
OK to confirm.
6. Press e to return to standby.
Note
The functionality of your CD5 cannot be guaranteed on all PABX.

Motorola CD5 Series Specifications

General

Brand	Motorola
Model	CD5 Series
Category	Cordless Telephone
Language	English