Motorola CLP107e User Manual

4 To receive calls, listen through the earpiece and press the PTT button to respond.
2.6.1
Talk Range
Table 2: Talk Range
Model Application Range (Typi-
cal Cover-
age)
Range
CLP107e Unit to Unit Up to 10 floors Up to 100,000 ft
2
(9,200 m
2
)
With Repeater
Up to 20 floors
Up to 250,000 ft
2
(23,200
m
2
)
2.7
Menu Setting
Procedure:
1 To navigate through the menu settings, press the Menu button.
2 To exit the menu, short press the PTT button or wait for three seconds.
2.7.1
Operations Using Menu Settings
This section explains operations using the menu settings.
NOTICE:
It is not necessary to wait for the voice prompt to be completed before continuing with pressing
the next button.
If you are in the menu mode, short press PTT or wait 3 seconds to exit the menu.
Procedure:
1 Changing channel:
a Press Menu button to navigate to Channel.
b Press the (+) or the (-) button to change channel.
2 Entering Monitor Mode:
a Press Menu button to navigate to Monitor.
b Press the (+) to activate or the (-) button to deactivate monitor.
3 Entering Scan Mode:
a Press Menu button to navigate to Scan.
b Press the (+) to activate or the (-) button to deactivate scan.
4 Sending Call Tone:
a Press Menu button to navigate to Call Tone.
b Press the (+) or the (-) button to send call tone.
Enabled through Customer Programming Software (CPS).
MN007419A01-AA
Chapter 2: Getting Started
17

Motorola CLP107e Specifications

General

Brand	Motorola
Model	CLP107e
Category	Two-Way Radio
Language	English