Motorola D10 SERIES User Manual

33Advanced settings
8.3.1 Switch call barring on/o
1. Press m, scroll
d
to ADVANCED SET and press m.
2. Scroll
d
to CALL BARRING . Press m.
3. Enter the master PIN (default setting 0000) and press m.
4. MODE is displayed. Press m.
5. Press
u
or
d
to select ON or OFF . Press m to conrm.
6. Press > to return to standby. You can now set the number. (See below)
8.3.2 Set a number to be barred
1. Press m, scroll
d
to ADVANCED SET and press m.
2. Scroll
d
to CALL BARRING . Press m.
3. Enter the master PIN (default setting 0000) and press m.
4. Scroll
d
to NUMBER . Press m.
5. If necessary, scroll
u
or
d
to the next available slot.
6. Press m and enter the number or prex you want to bar. Press m to conrm.
7. Press > to return to standby.
8.4 Easy call
When activated, this feature allows you to dial a number by pressing any key on your
handset (except >). This feature is very useful for access to emergency services.
8.4.1 Switch Easy call on/o
1. Press m, scroll
d
to ADVANCED SET and press m.
2. Scroll
d
to EASY CALL . Press m.
3. Enter the master PIN (default setting 0000) and press m.
4. MODE is displayed. Press m then press
u
or
d
to select ON . Press m to
conrm.
5. Press > to return to standby.
To switch Easy call o again:
1. Press >.
2. OFF? is displayed. Press m to conrm.
8.4.2 Set the Easy call number
1. Press m, scroll
d
to ADVANCED SET and press m.
2. Scroll
d
to EASY CALL . Press m.
3. Enter the master PIN (Default setting 0000) and press m.
4. Scroll
d
to NUMBER . Press m.

Motorola D10 SERIES Specifications

General

Brand	Motorola
Model	D10 SERIES
Category	Cordless Telephone
Language	English