37Advanced settings
8.13 Country
If you move to another country you can set your phone to be compatible with the network
settings of that country.
NOTE
If you make a mistake during welcome mode country selection, you can also reset your
country. Depending on your country, this option may be displayed as
NOT AVAIL
or you
country may not be displayed.
1. Press m, scroll
d
to
ADVANCED SET
and press m.
2. Scroll
d
to
SEL. COUNTRY
. Press m.
3. Enter the 4-digit master PIN and press m.
4. Scroll
u
or
d
to display the required country.
5. Press m to conrm.
6. Press > to return to standby.
8.14 Intrusion
When an external call is taking place, another handset registered to the base can join in,
making the call a 3-way conference, just by pressing
<
.
To enable this, Intrusion must be set to
ON
.
1. Press m, scroll
d
to
ADVANCED SET
and press m.
2. Scroll
d
to
INTRUSION
. Press m.
3. Scroll
u
or
d
to
ON
or
OFF
.
4. Press m to conrm.
5. Press > to return to standby.
8.15 ECO mode
Your D10 oers an ECO mode function which reduces the transmitted power and energy
consumption when switched on. This feature is set to
OFF
by default.
To turn ECO mode to
ON
or
OFF
:
1. Press m, scroll
d
to
ADVANCED SET
and press m.
2. Scroll
d
to
ECO MODE
and press m.
3. Press
u
or d to highlight
ON
or
OFF
then press m to conrm.
4. Press > to return to standby.
A conrmation beep is emitted and when switched ON the handset display will switch
between the handset’s name and
ECO MODE
.
NOTE
When ECO Mode is set to
ON
, the handset range will be reduced.
To Next Page
Loading...
Need help?
General
